 |
1750-TLM
Tower Light Monitor |
Potomac Instrument's 1750-TLM can help you meet requirements for tower
light monitoring safely and effectively.
Designed with the Broadcaster in mind the 1750-TLM provides built
in flexibility to simplify even the most complicated installations.
It can even alarm for single bulb failures on towers with Beacons
and Obstruction lights on a single circuit. Status oututs eliminate
the worry of operator interpretation and provide definitive Good-Bad
indications for the operator and your logging equipment. Don't let
tower light failures expose you to increased liability, the 1750-TLM
is compatible with most existing control equipment and may well provide
your best return on investment this year! |
| 1750-TLM
SPECIFICATIONS |
| Configuration |
Four comparators each with an adjustable
dc reference voltage and an output open-drain MOSFET which can be
turned on or off when the input voltage goes below or above the reference.
Each input incorporates a detector for an AC input from tower lighting
current sampling transformers. |
| Output Limits |
+50V max., 100 mA max., 0.3 w max. |
| Input Range |
0-3V AC rms max., (0-7.5V dc max.) |
| Logic |
On board circuitry for combining detected
conditions with logic "OR" or logic "AND" functions. Incorporates
one external input to allow "Daisy Chaining" of logic outputs from
multiple units. |
Dimensions
|
9 3/4" x 5 1/4" x 2 1/2" (Aluminum
Housing) |
| Shipping Weight |
3 lbs. |
| Power Requirements |
115V AC or 230V AC, 50-60 Hz, 10 VA
|
| Temperature Range |
0 deg.C - 40 deg.C ambient, operating
|
| Optional Accessories |
Simpson current sample transformer:
Mdl 186, Cat. #01321 Rated for currents to 50 Amperes.
Maryland Torroid current sample transformer: Mdl 12525 Flexible for
a wide range of currents by selecting the turns of primary wire applied
and the terminating resister used. |
Specifications subject to change without notice.
|
KEY FEATURES
- Designed for Broadcast Tower Applications
- FAA/FCC Compliance Assist
- Four Separate Inputs
- Power Line Tracking
- Photocell Inhibit
- "AND"/"OR" Logic Election
- Detects Single Lamp Failures
- "Daisy Chain" Capability for Multi-Tower
Applications
- Monitors Beacons and/or Obstruction Lights
- Binary Logic Status Outputs for Remote Control Interface
|
|
| |
|
